| 1. | Cut the sand colour card to measure 3 1/2" H x 2 1/2"W. |
| 2. | Ink up the watch face stamp with the brown ink pad. Randomly stamp over card 6 or 7 times. |
| 3. | Take a ball of cotton wool and using some brown decorating chalk, rub lightly over some areas of the card to "age". |
| 4. | Take the brown ink pad and run it around edges of base card. |
| 5. | Take a length of the gold thread, and using sticky tape fix to the top back of card about 1/4"from edge, wind thread vertically around card 4 times keeping threads about 4mm apart, fix end to back of base card. |
| 6. | Measure about 1 inch down from top of card, take another length of gold thread, fix end to back of card, wind thread horizontally around card 5 times, keeping threads about 4mm apart, fix end to back of card. |
| 7. | Take the clock face image and stick onto a piece of sand coloured card, trim to about 2mm all round. . Run brown ink pad around the edges. Stick image onto the base card at an angle as shown. |
| 8. | Take the printed Time definition, run the brown ink pad around the edges. Stick onto base card at an angle as shown. |
| 9. | Take the two clock hands and fix into position as shown. Fix brad in the centre. |
| 10. | Decoupage the two butterfly images using thin 3D foam. Stick onto card at an angle in top left corner as shown.
Cover reverse of card. |
